|
|
Tuning Software used with Moates hardware:
Click on these product descriptions to pull up the download links. You may be asked to go to another page, but that's OK. For USB drivers, see our 'Drivers' section. |
 |
|
 |
| Displaying 1 to 9 (of 9 products) |
Result Pages: 1 |
| |
Product Name+ |
Price |
Buy Now |
 |
ALDL Echo Test Program
This program will test your GM ALDL cable configuration to see if it responds appropriately. To use, the ALDL cable should be disconnected from your vehicle, and the COM port and USB driver configuration should be set up to match the program COM port setting selection. The cable should pass the 'fast test'.
This is also useful for testing HULOG, HondaLog, and other TTL-to-USB converters. When testing these, install a loopback jumper between pins 2 and 4 on the CN2 connector basis. This is the red and black wires on the cable which we supply! |
|
|
 |
Binary Editor 2010 for Fords from Clint Garrity
The Binary Editor software allows for editing of the Ford EEC binary data. Its definition files (Strategy Files) are open source and are saved in Excel. The Excel format makes editing the definitions very user friendly. You can look at the download page to see what definitions are supported. There is also a definition template that can be downloaded for those that would like create there own definition file. The Binary Editor can also display differences between binaries (Ford Tunes).
Binary Editor can display and log live data using either the TwEECer and or Moates Quarterhorse hardware. All parameters available for display or data logging are defined in the definition files. This makes it easy to change things like the number of decimal places parameters will use when displayed or logged. Binary editor can estimate quarter mile times based off the vehicle speed sensor. The accuracy of the quarter mile times will depend on the accuracy of the vehicle speedometer and how fast the logging rate is. With the Moates Quarterhorse the tuning parameters, such as MAF (Mass Air Flow sensor) curve can be changed on the fly. Yes this means you can finally tune while the car is running. It is no longer required to turn the car off and then download a new tune, just simple make the desired change and press the update button. It is not recommended or safe to make changes while driving. Make sure to have someone other than the driver make changes if live tuning is going to be done. |
$80.00 |
 |
 |
ECM852 Serial DOS-Based ALDL Software
This is the DOS-based software for GM TPI and 93 LT1. Won\'t work with USB adapters, and won\'t work with WinXP/2000. Works great with older laptops on Win98/MSDOS that don\'t have USB ports though. You\'ll need a serial-type ALDL interface such as those offered by www.akmcables.com and others. Free of charge. |
|
|
 |
EEC Editor Software from Paul Booth
Software for Ford vehicles only! This is the new Paul Booth EEC Editor software. Supports the Quarterhorse, Jaybird, F3, BURN2, F2A, F2E, everything.
Cost is based on year/model vehicle selection. |
|
|
 |
F8 Destiny Utility
This free, downloadable program will allow you to effectively manage the content of your F8/Destiny combo from your laptop. Calibration information is displayed in an easy-to-manage format. For use with non-encrypted files. |
|
|
 |
Flash & Burn Program for BURN1
This program is used to control the Flash & Burn "BURN1" device. With it, you can read and write chips. It also works with the AutoProm devices. Free of charge. |
|
|
 |
MXScan Standard
NO LONGER AVAILABLE!
For some reason the MXScan software has conflicts with Win7 and Vista, and it also does not work with the newer batch of TunerCat cables. The software is no longer under development. So, unfortunately for those that would like to explore this option, it is NOT available any longer. |
|
|
 |
Neptune/Demon Software/Hardware Combo
The NepTune Real-Time Programmable Engine Management System. This compact package fits in a standard socketed ECU and can be used in JDM small box ECUs as well as P30s and P72s with a knock board. Included in the package is one Demon unit and a software license for the NepTune tuning software. |
$399.00 |
|
 |
TunerPro RT
This program will operate all the functionality of the AutoProm, BURN1, ALDU1, and Ostrich. Allows simultaneous realtime emulation, binary editing, datalogging, and chip reading/burning. TunerPro registration is included with the AutoProm. |
$30.00 |
|
| Displaying 1 to 9 (of 9 products) |
Result Pages: 1 |
|
|
|
/*
.
