Neptune Software for Demons

Neptune Software for Demons: Do you have a Demon and you're thinking about trying or switching over to Neptune? For just $150, you'll be up to speed! NOTE: We'll need your existing Demon serial number, so please submit it in the comments section of your order!!! The NepTune Real-Time Programmable Engine Management System is the most advanced system available for working with your OBD1 Honda ECU. By adding this option to your Demon, you can enjoy these great features of the NepTune software: Actively supported and updated product! Beautiful 3D Beveled interface. User Friendly Toolbars with the options you need most. Real-Time Datalogging Of Sensor Data, Inputs, Outputs, and ECU Data. On Board Logging With Lossless Compression To Allow 3 To 5 Times The Regular Amount Of Data To Be Recorded. Offers Up To 3 Hours Of Datalogging Time With Compression Enabled. Datalog Playback, Save, and Export to CSV. Datalog Trimming. Datalog Commenting For Later Review or Sharing With A Tuner. Graphing Of Sensor Information With Real-Time Values and Live Scrub (Dragging with mouse). Live Graphing Of Real-Time Sensor Trends. Direct Serial Logging From LC-1, LM-1, and LM-2 Products (LM-2 currently requires connecting hardware to allow legacy serial connectivity). Map Trace and Lambda Trace. 24x24 Ignition and Fuel Maps For Precise Tuning. Dual Tables For Low/High Boost, Different Fuels, or Alpha-N (ITB) Tuning. Easy Injector Sizing. Fuel Trims for Cranking, TPS Tip-In, Post Start, and Individual Cylinders. Rev Limiter with Fuel Cut, Ignition Cut, or Both. Rev Limits Per Gear. Launch Control (2-step) With Anti-Lag. Full-Throttle Shift. Use The Check Engine Light As A Shiftlight With Different RPM Settings Per Gear. Idle Adjustments for Idle Speed, Idle Speed vs ECT, and Idle Ignition Corrections. Air Temp Corrections. Water Temp Corrections. Gear Based Fuel and Ignition Corrections. Access To Many Other Stock Fuel and Ignition Adjustments. PWM Boost Control With Simple, Boost By Gear, and Gear vs RPM Modes. Quad Stage Boost Control. Adjustable Prime Duration At Key On. Overheat Protection. Closed Loop Control With Selectable O2 Input, Conditions, and Wideband Support. Anti-Theft feature requires inputs or a code to be entered with TPS and Brake pedal. Also has a valet/fallback mode with adjustable rev limit. 2 Multi-purpose Outputs With Fuel and Ignition Adjustments. 1 Multi-purpose Output With Multiple Output Settings Based On MPH. 4+5=9 Programmable Analog Inputs For Extra Sensors. LM-2 USB Wideband fully supported. And A Lot More! Supported Vehicles      * 1992-2000 Civic     * 1992-2001 Integra     * 1992-2000 Prelude/Accord (requires one of the 92-95 Integra or Civic ECUs listed above)     * 1989-1991 Integra/Civic/CR-X (requires one of the 92-95 Integra or Civic ECUs listed above) Note: 1996-2001 Vehicles require OBD II to OBD I Conversion harness, 1988-1991 Vehicles require OBD0 to OBD1 conversion harness AND a chipped OBD1 ECU.  We do not sell these items:  Contact Xenocron for these items.   Supported ECUs     * 1992-1995 Civic (P05 | P06 | P08 | P28)     * 1995 Del Sol VTEC (P30)     * 1992-1993 Integra GS-R (P61)     * 1994-1995 Integra GS-R (P72)     * 1992-1995 Integra RS/LS/GS/SE (PR4 | P75)     * Chippable OBD-0 ECUs (PW0 | PR3 | PM6 | PR4) Additional Information:   If you have a NON-VTEC ECU (PR4 | P05 | P06 | P75) and you wish to run a VTEC motor, please purchase the appropriate VTEC Upgrade kit for your ECU. (See the Honda/Acura section of our site.)   Wideband Information   A Wideband Oxygen sensor is required for best tuning results. We offer a wide variety under the Wideband Products section.
For more information, please visit this products webpage.
Products Short Info:
The NepTune tuning software is compatible with your existing Demon hardware. Together, this is arguably the best solution out there for an enthusiast looking to tune their own car.