| |
Product Name+ |
Price |
Buy Now |
 |
Ford Product Tutorial
Click here to be taken through a guide of how to use our Ford-related products. Find out what your options are for different year/model vehicles in terms of datalogging, emulation, and chip burning equipment. Software options are also presented as they relate to hardware capabilities. |
|
|
 |
Binary Editor 2010 for Fords from Clint Garrity
The Binary Editor software allows for editing of the Ford EEC binary data. Its definition files (Strategy Files) are open source and are saved in Excel. The Excel format makes editing the definitions very user friendly. You can look at the download page to see what definitions are supported. There is also a definition template that can be downloaded for those that would like create there own definition file. The Binary Editor can also display differences between binaries (Ford Tunes).
Binary Editor can display and log live data using either the TwEECer and or Moates Quarterhorse hardware. All parameters available for display or data logging are defined in the definition files. This makes it easy to change things like the number of decimal places parameters will use when displayed or logged. Binary editor can estimate quarter mile times based off the vehicle speed sensor. The accuracy of the quarter mile times will depend on the accuracy of the vehicle speedometer and how fast the logging rate is. With the Moates Quarterhorse the tuning parameters, such as MAF (Mass Air Flow sensor) curve can be changed on the fly. Yes this means you can finally tune while the car is running. It is no longer required to turn the car off and then download a new tune, just simple make the desired change and press the update button. It is not recommended or safe to make changes while driving. Make sure to have someone other than the driver make changes if live tuning is going to be done. |
$80.00 |
 |
 |
BURN2 Chip Programmer
USB Chip Programmer works with the AT29C256, 27SF512, and AM29F040 chips. Self-powered from the USB port, so no power adapter is needed! Burner can also be used to read stock GM memcals using the HDR1 adapter. While it will only program the three types of chips listed, please note that those three chips can be used as drop-in replacements for most EFI applications. Comes with stand-alone chip programming software (available for download). Also compatible with TunerPro RT. Will read most stock-style chips (2732A, 27C128/256/512/etc). Mini-USB cable is included. |
$85.00 |
|
 |
EEC Editor Software from Paul Booth
Software for Ford vehicles only! This is the new Paul Booth EEC Editor software. Supports the Quarterhorse, Jaybird, F3, BURN2, F2A, F2E, etc.
You may purchase 'licenses' for advanced Boothware datalogging and emulation definitions for select applications. See the 'pulldown' option here for what is available. This will unlock the full potential of the Quarterhorse for extended logging patchcode and realtime tuning. |
|
|
 |
F2A Ford Module Programming Adapter
With this adapter (shown at top), you will be able to use the BURN1 device to read and write your F2 Ford Memory Module directly! No need to remove the chip from the module, this lets you read it through the edgecard connector. See the 'F2E' for more functionality. Bottom image shows the F2A hooked up with an F2 and BURN1. |
$10.00 |
|
 |
F2E Integrated Ford EEC Computer Reading Interface
If you want to use your BURN1/F2A combo to read the binaries off your stock EEC Computer, then this is the hot item! Allows you to power the EEC Computer on the bench via the USB port through the BURN1/F2A! No external power needed. Might even work in the car, haven't tested that out yet. Lets you read a full 4-bank EEC-V in less than 10 seconds. Item is shown in top picture. Bottom picture shows it in use with an F2A and BURN1 hooked up to a 2-bank EEC-V. |
$10.00 |
|
 |
F3 Ford Memory Adapter
This device is a J3 chip module for EEC-IV and EEC-V. It should work with all applications, including Turbo EEC-IV. Supports 1,2,4 bank EEC systems. Comes with memory chip already installed. Just use the BURN1+F2A to reprogram it. Also has provisions for an external switch (single wire solder on and switch to chassis ground) for selecting between 2 separate programs. |
$60.00 |
|
 |
Ferrite Bead for 3.5mm USB Cable
You can add this to your USB cable to reduce RFI noise. If your USB device drops out connection from the PC while the car is running, this might be all you need! Snaps right onto existing USB cable. This one is for the thinner cables, such as those included with the Roadrunner and early QuarterHorses. |
$2.00 |
|
 |
Ferrite Bead for 4.5mm USB Cable
You can add this to your USB cable to reduce RFI noise. If your USB device drops out connection from the PC while the car is running, this might be all you need! Snaps right onto existing USB cable. This one is for the thicker cables (4.5mm max), such as those included with the Ostrich, APU1, and bulkhead-cable kit used with QuarterHorses and Demons. |
$2.00 |
|
 |
Jaybird J3 Module Reader/Programmer
This device, coupled with an F3 chip module, is all you will need to recalibrate Ford pre-2005. The Jaybird plugs into the mini-USB on one side and the F3 modules on the other. It takes the place of a chip burner and J3 port adapter (it IS a chip burner with native J3 interface). This device will NOT read stock ECUs, but you can usually download the binary from the internet. If you need to read stock ECUs, you'll still want to look at the BURN2+F2A+F2E. Comes with mini-USB cable. |
$75.00 |
|
 |
QuarterHorse for Fords
For a low introductory price of $249, the QuarterHorse delivers in unparalleled fashion. It gives you absolute, bumpless, 100% realtime tuning AND realtime datalogging for all EEC-IV and EEC-V through 2004. It plugs into the J3 port like a chip, but its capabilities are stunning. You can change ANY parameter while the vehicle is running without disturbing operation. You can log ANY parameter in RAM from the EEC-IV and V at sample rates well over 2,000 frames per second through the same mini USB cable (no OBD cable needed). |
$249.00 |
|
 |
Rotary QH Switch
This rotary QH Switch provides 4 positions of selection when used with the QuarterHorse on EEC-IV applications. It is NOT to be used with EEC-V. It requires 3 solder points on the connector of the QH as shown, and proper software-side configuration. With this switch, you can easily select from 4 different calibrations without the presence of a PC. Knobs (1/4" flat shaft) available at RadioShack and elsewhere. Includes cable, switch, and connectors. |
$30.00 |
|
| |
SideSaddle
Used to mount the Quarterhorse (or other J3 device) externally instead of inside the ECU. Useful for shops or tuners to avoid clearancing issues inside the ECU. |
$10.00 |
|
 |
USB 2.0 Cable A-B 6 ft
USB 2.0 Cable, black, 6 feet long, A-B male, plugs into your PC on one end, and into a USB device such as the BURN1 or APU1 on the other end. Good as a spare or replacement, or for other USB stuff. |
$4.00 |
|
 |
USB 2.0 Mini-B to Std-B Bulkhead Cable/Bracket/Kit
This 3-foot cable works well with the QuarterHorse and the Demon, both of which mount internally inside the ECU and are connected with mini-B USB. By creating a Standard-B socket outboard, you can provide a robust, permanent installation free from risk of pulling the device loose from the ECU. It also provides an ideal disconnect point (glovebox, under dash, etc) so that you can easily reach the connection point and keep things low-profile. A stainless steel bracket and mounting hardware are also included which further bring you into the lap of luxury with respect to connecting to your hard-to-reach hardware! |
$9.00 |
|
.
