The Honda Tuning Kit was put together to better assist customers that are looking to tune Honda vehicles on a commercial basis. (i.e. many cars) It comes with the hardware needed to chip ONE ECU along with all re-usable hardware modules. Additional Honda Chip Kits are required for additional vehicles. This kit is intended for more experienced users that already have a software solution in mind. ***This kit does not come with any software - it must be purchased separately.*** If you just want to tune your own vehicle, the Demon+Neptune combo
is a much better choice as it includes more capable hardware and software in one comprehensive bundle.
* 1992-2000 Civic
* 1992-2001 Integra
* 1992-2000 Prelude/Accord (requires one of the 92-95 Integra or Civic ECUs listed above)
* 1989-1991 Integra/Civic/CR-X (requires one of the 92-95 Integra or Civic ECUs listed above)
Note: 1996-2001 Vehicles require OBD II to OBD I Conversion harness, 1988-1991 Vehicles require OBD0 to OBD1 conversion harness AND a chipped OBD1 ECU. We do not sell these items: Contact Xenocron
for these items.
* 1992-1995 Civic (P05 | P06 | P08 | P28)
* 1995 Del Sol VTEC (P30)
* 1992-1993 Integra GS-R (P61)
* 1994-1995 Integra GS-R (P72)
* 1992-1995 Integra RS/LS/GS/SE (PR4 | P75)
* Chippable OBD-0 ECUs (PW0 | PR3 | PM6 | PR4)
Note: Please place note in order if you have a JDM "Square Case" ECU.
This kit comes with the following hardware components:
* Burn2 Chip Burner
* Ostrich 2.0 Real-Time Emulator
* Xtreme HuLog Datalogging Adapter
* Honda1 Chipkit
Supported Tuning Software:
* CROME / CROME Pro / CROME Dealer (Website
: Purchase CROME Pro $150 here
for datalogging support)
* eCtune (website
* NepTune DEALER PACKAGE ONLY!!! ( Website
: Inquire via email to purchase dealer setup for $500 by email
* BRE (for OBD0 Vtec) (website
* Open TurboEdit (for OBD0 non-vtec) ( Website
* Hondata S100 and S200
Note: The kit does not come with any software!!!
We do NOT sell any of the software that can be used with this kit. We will try to get you up and running with most packages but we CANNOT provide extensive tutoring or troublehsooting. If you want a product with more support, buy the Demon+Neptune combo
If you have a NON-VTEC ECU (PR4 | P05 | P06 | P75) and you wish to run a VTEC motor, please purchase the appropriate VTEC Upgrade kit for your ECU. (See the Honda/Acura
section of our site.)
The Xtreme HuLog is compatible with nearly all standalone datalogging software packages such as Freelog.
A Wideband Oxygen sensor is required for best tuning results. We offer a wide variety under the Wideband Products