| |
Product Name+ |
Price |
Buy Now |
 |
'BURN2 Chip Programmer'
USB Chip Programmer works with the AT29C256, 27SF512, and AM29F040 chips. Self-powered from the USB port, so no power adapter is needed! Burner can also be used to read stock GM memcals using the HDR1 adapter. While it will only program the three types of chips listed, please note that those three chips can be used as drop-in replacements for most EFI applications. Comes with stand-alone chip programming software (available for download). Also compatible with TunerPro RT. Will read most stock-style chips (2732A, 27C128/256/512/etc). Mini-USB cable is included. |
$85.00 |
 |
 |
'F3' Ford Memory Adapter
This device is a J3 chip module for EEC-IV and EEC-V. It should work with all applications, including Turbo EEC-IV. Supports 1,2,4 bank EEC systems. Comes with memory chip already installed. Just use the BURN2+FA or Jaybird to reprogram it. Also has provisions for an external switch (single wire solder on and switch to chassis ground) for selecting between 2 separate programs. |
$60.00 |
|
 |
'Jaybird' J3 Module Reader/Programmer
This device, coupled with an F3 chip module, is all you will need to recalibrate Ford pre-2005. The Jaybird plugs into the mini-USB on one side and the F3 modules on the other. It takes the place of a chip burner and J3 port adapter (it IS a chip burner with native J3 interface). This device will NOT read stock ECUs, but you can usually download the binary from the internet. If you need to read stock ECUs, you'll still want to look at the BURN2+F2A+F2E. Comes with mini-USB cable. |
$75.00 |
|
 |
'QuarterHorse' for Fords
For a price of $249, the QuarterHorse delivers in unparalleled fashion. It gives you absolute, bumpless, 100% realtime tuning AND realtime datalogging for all EEC-IV and EEC-V through 2004. It also lets you read stock EEC boxes to establish a starter tune. The QH plugs into the J3 port like a chip, but its capabilities are stunning. You can change ANY parameter while the vehicle is running without disturbing operation. You can log ANY parameter in RAM from the EEC-IV and V at sample rates well over 1,000 frames per second through the same mini USB cable (no OBD cable needed). All necessary cabling is included, but software is needed separately. |
$249.00 |
|
 |
Ford Product Tutorial
Click here to be taken through a guide of how to use our Ford-related products. Find out what your options are for different year/model vehicles in terms of datalogging, emulation, and chip burning equipment. Software options are also presented as they relate to hardware capabilities. |
|
|
 |
Binary Editor 2012
The Binary Editor software (aka BE) is very popular for tuning Ford vehicles with the Quarterhorse or Jaybird+F3. Supports realtime editing, datalogging, and chip burning. |
$100.00 |
|
 |
Binary Editor based POPS Racing Definitions and Support
Not for commercial use. Not for shop use. This is for individual enthusiasts only. If you need a shop package, please contact Adam directly for pricing.
The purchase of this item will provide you with the selected encrypted CRY definitions available from Adam Marrer of Pops Racing. This includes vehicle year/model coverage beyond those publicly available BE definitions. As a Pops Racing Definition customer, Adam is available with live support to help you configure your BE/QH/F3 combination. |
$195.00 |
|
 |
EEC Editor Software from Paul Booth
Software for Ford vehicles only! This is the new Paul Booth EEC Editor software. Supports ALL Moates Ford hardware.
Cost is based on year/model vehicle selection. |
|
|
 |
F8 Destiny Programmer
Connect the Destiny, and conveniently reprogram the F8 in-vehicle without removing it from the PCM! Includes programmer, 6' USB cable, and 4' shielded programming cable. Available through www.dp-tuner.com, our partner reseller. |
$150.00 |
|
 |
F8 Destiny Utility
This free, downloadable program will allow you to effectively manage the content of your F8/Destiny combo from your laptop. Calibration information is displayed in an easy-to-manage format. For use with non-encrypted files. |
|
|
 |
F8 Multi-Position Chip
The F8 Chip Module is a new and unique tool for all Ford pre-2005. With the available switch, a rotary knob is used to select from 8 tunes on-the-fly. Disconnect the switch, connect the Destiny, and conveniently reprogram the F8 in-vehicle without removing it from the PCM! This product combination is recommended for enthusiasts who do their own tuning as well as shops which offer custom calibrations. Available through www.dp-tuner.com, our partner reseller. |
$165.00 |
|
 |
F8 or QH Rotary Switch
When used with the F8 module, provides 8-position adjustability for on-the-fly switching. Connect the cable to your Destiny programmer as needed. Includes 4' cable, switch, billet knob, mounting nut, and connectors.
Quarterhorse notes:
4 positions when used with the QH on EEC-IV. NOT to be used with EEC-V and the QH. Not all software supports this! Check with us first. |
$30.00 |
|
 |
FA Ford Module Programming Adapter
With this adapter, you will be able to use the Burn2 device to read and write your F3 Ford Memory Module directly! No need to remove the square chip from the module, this lets you read it through the edgecard connector. See the 'FE' for more functionality. |
$10.00 |
|
 |
FE Ford EEC Computer Reading Interface
Allows you to power the EEC Computer on the bench via the USB port through the Burn2/FA via J3 port. Also works in-vehicle. Lets you read any pre-2005 EEC4/5 (1,2,4-bank) in less than 10 seconds. Requires Burn2+FA. |
$10.00 |
|
 |
Ferrite Bead for 4.5mm USB Cable
You can add this to your USB cable to reduce RFI noise. If your USB device drops out connection from the PC while the car is running, this might be all you need! Snaps right onto existing USB cable. This one is for the thicker cables (4.5mm max), such as those included with the Ostrich, APU1, and bulkhead-cable kit used with QuarterHorses and Demons. |
$2.00 |
|
 |
SideSaddle
Used to mount the Quarterhorse (or other J3 device) externally instead of inside the ECU. Useful for shops or tuners to avoid clearancing issues inside the ECU. |
$10.00 |
|
 |
TunerPro RT V5
TunerPro RT v5 covers all of the capabilities of the V4 software, as well as many new features including support for the Quarterhorse with Ford A9L and T4M0 datalogging. Advanced ADX configuration and plug-in support opens new doors for communications flexibility.
This highly configurable software supports MANY vehicles including GMOBD1, Ford, Nissan, BMW, Porsche, and others. |
$39.00 |
|
.
